Toggle on or off

Main Menue

Select Language

Český English Français Deutsch Italiano Polski РУССКИЙ

Users on Tour

The first North American Journey Man

Read the diary blog of
Chris Koehn

Software glitch?

Q/A about D-Wall, D-Roof, D-Floor/ Ceiling, D-CAM
Reply to topicReply to topic Printer Friendly Page

Software glitch?

Post Posted: 02.05.2012 16:58

Help, I cannot notch the green beam where I have extended the blue beam.I can do this on all other beams, and even the other end of this beam.
Will someone pleas check my file.

oakcraft
Dauerposter
Dauerposter
 
Posts: 51
Joined: Dec 13, 2011
Location: UK

Re: Software glitch?

Post Posted: 02.05.2012 17:31

I am sorry but I do not understand what you want to do.
_________________
Viele Grüße,
Joachim Neumann (Dietrich's AG)
Software für den Holzbau, Abbund, Holzrahmenbau, Blockbau, Ingenieurholzbau und für die Fertighausindustrie

if (ahnung == 0) { read "Tipps & Tricks"; use SEARCH; use Blog; } else { use brain; make post; }

Joachim Neumann
Moderator
Moderator
 
Posts: 26853
Joined: Jul 07, 2004
Location: Neubiberg

Re: Software glitch?

Post Posted: 03.05.2012 00:26

Hello,

I opened your position, and used 3-8-1 on this corner connection, and it worked fine.

This is the lap joint function. Were you using the 3-8-4 notch function?

I hope this solves the problem.

dan

Daniel Depoe
Intern
Intern
 
Posts: 32
Joined: Mar 23, 2010

Re: Software glitch?

Post Posted: 03.05.2012 09:57

We have used the Half-Lap joint to create a lap between the green and blue beams.
Then we have exploded the lap joint on the blue beam, and changed the size of the lap so it notches into the green beam by 15mm on each side.
Now we need to notch the green beam to remove this 15mm of timber.
It works on one side only, but not the other side.

We have tried this on several beams, and it works all works fine except for this one.

oakcraft
Dauerposter
Dauerposter
 
Posts: 51
Joined: Dec 13, 2011
Location: UK

Re: Software glitch?

Post Posted: 03.05.2012 12:44

Sometimes you just have to replace the beam and do it again.
_________________
Jim Rogers
Dietrich's North America
Consulting and Training
Georgetown, MA, USA

Version 13.04, 12.03, 11.06, 10.02, 9.05, 8.04, 7.03, and 5.05

Jim Rogers
Super Extrem Poster
Super Extrem Poster
 
Posts: 331
Joined: Jul 21, 2004

Re: Software glitch?

Post Posted: 03.05.2012 13:38

I cannot find a big difference between the two ends of the green beam. The intersections seem to be the same.
I just found a difference in the height position of the blue beams of about 0.3mm from end end of the green beam to the other end.
But where do you want to create a notch?
Perhaps I am blind...
_________________
Viele Grüße,
Joachim Neumann (Dietrich's AG)
Software für den Holzbau, Abbund, Holzrahmenbau, Blockbau, Ingenieurholzbau und für die Fertighausindustrie

if (ahnung == 0) { read "Tipps & Tricks"; use SEARCH; use Blog; } else { use brain; make post; }

Joachim Neumann
Moderator
Moderator
 
Posts: 26853
Joined: Jul 07, 2004
Location: Neubiberg

Re: Software glitch?

Post Posted: 03.05.2012 13:50

Excuse the crudeness, but I have quickly shaded the original attachment.
Shown in green is the area where the two beams overlap by 15mm.

oakcraft
Dauerposter
Dauerposter
 
Posts: 51
Joined: Dec 13, 2011
Location: UK

Re: Software glitch?

Post Posted: 03.05.2012 13:54

I think that I am looking at the wrong connection. Could you please give me just the number of the two beams?
_________________
Viele Grüße,
Joachim Neumann (Dietrich's AG)
Software für den Holzbau, Abbund, Holzrahmenbau, Blockbau, Ingenieurholzbau und für die Fertighausindustrie

if (ahnung == 0) { read "Tipps & Tricks"; use SEARCH; use Blog; } else { use brain; make post; }

Joachim Neumann
Moderator
Moderator
 
Posts: 26853
Joined: Jul 07, 2004
Location: Neubiberg

Re: Software glitch?

Post Posted: 03.05.2012 14:14

Its the joint at the top of wall 7 and 3.

This help more?

oakcraft
Dauerposter
Dauerposter
 
Posts: 51
Joined: Dec 13, 2011
Location: UK

Re: Software glitch?

Post Posted: 03.05.2012 15:02

With the notch I too cannot produce this process but it would be easier anyway if you would use the the function 3-07-1 for the whole connection.
Use the settings of the picture and select the green beam first.
_________________
Viele Grüße,
Joachim Neumann (Dietrich's AG)
Software für den Holzbau, Abbund, Holzrahmenbau, Blockbau, Ingenieurholzbau und für die Fertighausindustrie

if (ahnung == 0) { read "Tipps & Tricks"; use SEARCH; use Blog; } else { use brain; make post; }

Joachim Neumann
Moderator
Moderator
 
Posts: 26853
Joined: Jul 07, 2004
Location: Neubiberg

Re: Software glitch?

Post Posted: 03.05.2012 15:15

Works perfect, thanks.

oakcraft
Dauerposter
Dauerposter
 
Posts: 51
Joined: Dec 13, 2011
Location: UK
Display posts from previous:   
Reply to topicReply to topic Page 1 of 1

Timber Design Modules

Jump to:  



You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

All times are GMT + 1 Hour