Block ein- oder ausblenden

sorting no problems

Q/A about D-Wall, D-Roof, D-Floor/ Ceiling, D-CAM
Neue Antwort erstellenNeue Antwort erstellen Druckbare Version

sorting no problems

Posten Verfasst am: 14.04.2009 15:29

Hello,
I redone old project and at last doing machine files I met prblems with sorting no. I am change few times sortings and nothing.
It says: Among the selected group of objects are different items with indentical sorting numbers. Please select diferent objects.
What I must do?
_________________
Vilmantas Liutkus
Constructor engineer
Roof constructions, timber frame - shield houses

Version 6.02 (7.01 not using)

Vilmantas
Extrem Poster
Extrem Poster
 
Beiträge: 257
Dabei seit: Mar 08, 2007
Wohnort: Lithuania, Klaipeda region

Re: sorting no problems

Posten Verfasst am: 14.04.2009 15:56

I have ran into this as well. For whatever reason it's not letting you output items with quantities over 1. What I do is activate only 1 item of the multiply quantities(so if you have an item that has a quantaty of 6 then you only activate 1 of those 6) then output these items and change the quantaties back to the correct amount after you have output them. This can be a tedious ordeal if you have many multiples and maybe there is another way around it...but i haven't figured that out.

BrianM
Ab- und Zu-Poster
Ab- und Zu-Poster
 
Beiträge: 21
Dabei seit: Jun 05, 2008

Re: sorting no problems

Posten Verfasst am: 16.04.2009 07:37

You can not transfer beams that have the same sorting number but are different in shape and processes to the same machine file.
To avoid this you have to set up the sorting function correctly.
Use the attached settings to sort and you will not run into problems.
What the settings mean:
  • Start Number : This is the first number that will be used (Walls=1, Ceilings=3000, etc.)
  • Restart Sorting : 1-Position Wise means #1 is used once in this building. If you set this to 3-Wall Wise every wall will start with #1 which does not mean that all #1s are identical
  • Sort According To: 3-Wall means that the program will look for identical pieces within one wall and give them the same number. Identical pieces in a different wall get a separate number.

Generally I recommend to make separate machine files for Walls, Roof, Ceiling, Trusses and D-CAM
_________________
Mit freundlichen Grüßen,
With kind Regards,

Markus Brunn

Markus Brunn
Moderator
Moderator
 
Beiträge: 154
Dabei seit: Jul 15, 2004
Wohnort: München

Re: sorting no problems

Posten Verfasst am: 09.03.2010 17:53

I realise this is an older post but i have a very large job right now where i sort according to position and there are 87 different panels - most of which are multiples of the same. When i try to output to machine I get the error message:
"Among the selected group of objects are different items with identical sorting numbers"
So i sort according to wall like Markus had stated to do above, and now instead of having 87 parts, i have 237. This just made a lot more work, as i usually have to edit each print and manually nest these as well. Are there any other options so i can keep my 87 parts?

BrianM
Ab- und Zu-Poster
Ab- und Zu-Poster
 
Beiträge: 21
Dabei seit: Jun 05, 2008

Re: sorting no problems

Posten Verfasst am: 14.06.2011 20:04

I'm bringing this post back to the surface because even after 2 years, we are still dealing with having to single out all multiple quantity panels in order to output to the machine and this is very tedious and time consuming.

Markus Brunn:
You can not transfer beams that have the same sorting number but are different in shape and processes to the same machine file.

My question is -why are panels with different shapes and processes receiving the same sorting number? Shouldn't they receive different sorting numbers if they have different shapes and processes and thus solve the machine output problem?

BrianM
Ab- und Zu-Poster
Ab- und Zu-Poster
 
Beiträge: 21
Dabei seit: Jun 05, 2008

Re: sorting no problems

Posten Verfasst am: 24.06.2011 07:07

Hello Brian,

it would be good to see which settings you use to create the sorting numbers.
The problem with transfering beams or panels to a machine is that the Software of the machine just allows to get a sorting number once in one file.
Depending on your settings for the sorting numbers you get one number once or a lot of times. In case one you can transfer all panels at the same time in case two you have to tranfer the panels in different files.
It should not be a problem to get all panels transfered in one file but then you have to use settings for the sorting numbers which produc the right numbers.

- Please show me your settings.
- Do you transfer panels from wall, ceiling, roof at the same time?
_________________
Viele Grüße,
Joachim Neumann (Dietrich's AG)
Software für den Holzbau, Abbund, Holzrahmenbau, Blockbau, Ingenieurholzbau und für die Fertighausindustrie

if (ahnung == 0) { read "Tipps & Tricks"; use SEARCH; use Blog; } else { use brain; make post; }

Joachim Neumann
Moderator
Moderator
 
Beiträge: 24351
Dabei seit: Jul 07, 2004
Wohnort: Neubiberg
Beiträge der letzten Zeit anzeigen:   
Neue Antwort erstellenNeue Antwort erstellen Seite 1 von 1

Timber Design Modules

Gehe zu:  



Du kannst keine Beiträge in dieses Forum schreiben.
Du kannst auf Beiträge in diesem Forum nicht antworten.
Du kannst deine Beiträge in diesem Forum nicht bearbeiten.
Du kannst deine Beiträge in diesem Forum nicht löschen.
Du kannst an Umfragen in diesem Forum nicht mitmachen.
Du kannst keine Dateien anhängen.
Du kannst keine Dateien herunterladen.

Alle Zeitangaben sind in GMT + 1 Stunden